Pool Tile Cleaning in Los Angeles
Pool tile cleaning across Los Angeles starts at $1,800. We remove calcium, mineral scale, and waterline buildup from glass, ceramic, porcelain, pebble, and natural-stone tile using the right method per surface, with same-day diagnostics in Sherman Oaks, Encino, Beverly Hills, Studio City, Tarzana, and Woodland Hills.
Every job includes the following.
- On-site evaluation of tile type, scale severity, and method selection
- Calcium and mineral scale removal from the full waterline tile band
- Bead blasting (glass beads) for hard scale on glass, ceramic, porcelain
- Salt or soda blasting for delicate stone and pebble surfaces
- Surface-safe chemical treatment when blasting is not appropriate
- Containment and full cleanup of blast media and runoff
- Photo before-and-after report delivered the same day
- Same-day priority for active weekly-service customers
Four steps. Written commitments at every step.
-
01
Free site visit
Steve or a senior tech walks the property, measures, photographs, and discusses scope with you in person.
-
02
Written quote
Itemized quote in 48 hours. No hidden line items, no upcharge surprises mid-job.
-
03
Schedule
Pick a start date that works for your household. We commit in writing and send a 24-hour reminder before each crew visit.
-
04
Execute & sign-off
Same W-2 crew start to finish. Daily photo updates. Final walk-through and warranty docs delivered before you pay the balance.
See the difference real pool tile cleaning makes.
A look at the kind of transformation our crew delivers on every pool tile cleaning job.
Before
After
- Pool Calcium Tile Bead Blast Cleaning $1,800
Final price depends on pool size, equipment, finish selection, and site access. We give you a written quote within 48 hours of the free site visit. No mid-job upcharges.
What customers ask before signing the contract.
How much does pool tile cleaning cost in Los Angeles?
Pool tile cleaning starts at $1,800 for a standard residential waterline band with moderate calcium buildup. Larger pools, heavy mineral scale, or delicate surfaces (pebble, natural stone) are quoted after a free on-site evaluation. Steve walks the pool, identifies the tile type and scale severity, and emails an itemized quote within 24 hours.
What is the difference between bead blasting and chemical cleaning?
Bead blasting fires fine glass beads at the tile to mechanically knock off calcium scale, safe on glass and ceramic, and the beads dissolve in pool water without residue. Chemical cleaning uses muriatic-based gels that dissolve the scale, faster but harsher on grout and surrounding finishes. We pick the method by tile type, never the other way around.
How often should pool tile be cleaned in LA?
Most Los Angeles pools need professional tile cleaning every 18 to 36 months depending on water hardness, fill source, and how aggressively chemistry is managed. Sherman Oaks, Encino, and Woodland Hills typically run on the shorter end because of LADWP fill-water hardness. Weekly service slows the buildup but does not eliminate it.
Will tile cleaning damage my pool tile or grout?
Not when the right method is chosen for the tile type. Bead blasting is safe on glass, ceramic, and porcelain. Soda or salt blasting is used on pebble and natural stone where glass beads could pit the surface. Chemical methods are restricted to non-porous tile with intact grout. Steve identifies the tile type during the on-site evaluation before quoting.
Do you clean pebble, glass, and natural-stone tile?
Yes. Pebble pools (PebbleTec, PebbleSheen) get soda blasting because glass beads can pit the rough surface. Glass mosaic and ceramic accept bead blasting. Natural stone (travertine, slate, flagstone) is handled with low-pressure soda blasting plus a surface-safe pH-neutral wash. We will tell you on-site if the tile is too damaged for cleaning and a replacement is the better call.
Do I need to drain the pool for tile cleaning?
No. Pool tile cleaning is done with the pool full. We work from a vacuum platform set on the deck, blast at the waterline, and contain the media so it stays out of the deep end. Pumps stay off during the visit so the spent media does not cycle through the filter, then the pool returns to normal operation when we leave.
Can badly stained tile be restored, or does it need to be replaced?
Most calcium and mineral staining comes off with the right method. What does not come off is usually pitting or etching in the tile glaze itself, which cleaning cannot reverse. We tell you on-site which category your tile falls into before quoting, rather than charging for a clean that will not hold.
Will the calcium come back after cleaning?
Some scale return is normal in hard-water areas like the San Fernando Valley. Keeping calcium hardness and pH balanced week to week slows the buildup significantly, which is why weekly-service customers typically go the full 18 to 36 months between professional cleanings.
Do you clean the tile below the waterline too, or just the visible band?
The standard job covers the visible waterline band, where scale actually forms from evaporation and splash-out. Submerged tile below the waterline rarely scales the same way, so we only quote that separately if there is a specific issue like a stuck-open feature line.